Additional information
| Weight | .250 kg |
|---|
Back to HARDWARE & PARTS
Schaller M6 Mini
$74.95
Schaller M-6 Mini Guitar Machines
• 10mm (13/32″) diameter pegholes required
• Removable metal knobs
• Mounting screws, threaded hex bushings and washers included
• Set of 6
Installation Tips
Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.
Related products
Hot Rails Strat SHR-1B
Summary
With all the feel and tone of a high output humbucker, this is our most powerful passive pickup for Strat.Description
This single coil rails sized humbucker delivers high output, loads of midrange harmonics, and an aggressive crunch that make this a great bridge pickup for rock and metal. Chords are full and powerful, and single notes jump out with amazing sizzle. A Hot Rails in the bridge position will literally transform your Strat into a completely different instrument. This pickup is a drop-in for any standard single coil pickup route.Pair with our Hot Rails Strat – neck BlackHand built in Santa Barbara, CA, the Hot Rails for Strat comes with a ceramic magnet, 4-conductor lead wire for multiple wiring options, and is wax potted for squeal free operation.
Vintage Staggared Strat Middle RWRP SSL-1
Summary
For the perfect noiseless 2 & 4 Stratocaster quack, we offer this reverse woundreverse polarity version of our classic SSL-1 Strat pickup.Description
The Vintage Staggered RWRP for Stratocaster uses the same hand ground alnico 5 rod magnets and heavy Formvar magnet wire as our standard version, but is made reverse woundreverse polarity, RWRP. When combined with the neck or bridge pickups, it will produce that classic in-between Strat quack, but with none of the traditional single coil hum. On its own, this pickup will give you the same bright, crisp tone that you get from the standard wound model.Combine with an SSL-1 in the neck and bridge for a complete vintage set. Or combine with a higher output bridge model such as a SSL-5 for more bite. Built the same way since 1978, we use the proper color and thickness of Forbon flatwork with all of our vintage Fender style single coil pickups. Along with the period correct magnet stagger, this pickup comes complete with waxed and tinned cloth pushback hook-up wires and traditional keyed bottom plate. We hand file the flatwork, assemble, and lacquer the bobbin just as it was done during Fenders Golden Age.
YJM Fury Strat Set STK-10S Black
Summary
Voiced by Yngwie himself, this set of noiseless Strat single coils will give you the articulate and fluid response you need to bring The Fury.Description
While based on our original patented Stack design, the YJM Fury uses custom length alnico 5 rod magnets, and a unique coil architecture to bring you that perfect balance of sweet fluidity and articulation that is Yngwie J Malmsteen. The bridge model is designed to handle Yngwies chordal onslaught, and it delivers a precise, articulate response that has just the right amount of high end without sounding harsh or brittle. The bridge model is wound hotter to provide better balance with the neck & middle pickups.The neckmiddle model is designed to bring out the balance of Yngwies fluid left-hand technique with his broad mix of right-hand pick attack for a tone that is sweet and smooth. There just the right amount of high end to make this pickup extremely articulate, and especially responsive to dynamics.And its dead quiet Back in the 80s we patented a special bottom coil that actually injects negative hum into the pickup circuit, and at the end of the production process we fine tune each pickup for maximum noise cancelation. Hand made in Santa Barbara, CA the YJM Fury uses custom alnico 5 rod magnets, 4- conductor lead wire, and is wax potted for squeal free performance.
Blackouts Set AHB-1S
Summary
A set of our active Blackouts humbuckers will turn any guitar into a heavy metal behemoth.Description
This is a neckbridge set of our original high-output active Blackouts humbuckers. The perfect choice for metal players looking for warm complex chording and singing leads, the original Blackouts neck practically cries out for two-handed shred and thick rhythm playing. Its extended frequency response and organic feel make this a great humbucker for those who demand both responsiveness and the true tonal character of their guitar to shine through.The original Blackouts bridge humbucker delivers all of the power and full bodied punch that todays metal players demand from an active pickup. You get the high output signal level of an active pickup, with more of an organic feel and open tonal response that allows the character of your guitar to come through. The treble and bass response is extended beyond the range of traditional active pickups, and has been carefully balanced with a slightly scooped midrange for the perfect crunch. This pickup excels at screaming pinched harmonics and hyper-speed riffage with responsive dynamics across the entire fretboard.Comes with pots, hardware, quick-connector cables, capacitor (active pickups require a special cap value), output jack, battery clip, and wire needed for installation. If your guitar already has active pickups with quick-connector cables installed, you should be able to simply unplug them and plug in your Blackouts.