Additional information
Weight | .100 kg |
---|
$51.00 – $74.00
Weight | .100 kg |
---|
Trembuckers have wider pole piece spacing, perfect for symmetrical positioning under the strings of guitars with a tremolo or wide spaced hard tail bridge (2” or wider from the center of the Low E to High E directly over the bridge pickup).
Hand built in our Santa Barbara, CA factory, the Nazgûl uses a large ceramic bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance.
The Blackouts Metal humbucker is the reincarnation of our original LiveWire Metal humbucker. With its infamous brain melting output level and headroom, this pickup is so hot that we added a feature that gives you access to a second, moderate, output level. The Blackouts Metal comes from the factory with a slide-on shunt connecting the two pins. Simply remove the shunt and the pickup will be in moderate output mode. You can also run the two pins to a pushpull or mini-toggle switch so you can switch between the two output levels for a built-in boost switch. This pickup is thick and crunchy, and will provide a massively saturated distortion tone with tons of string sensitivity. Lock in with the double bass and lay waste to those who stand before youComes with pots, hardware, quick-connector cables, capacitor (active pickups require a special cap value), output jack, battery clip, and wire needed for installation. If your guitar already has active pickups with quick-connector cables installed, you should be able to simply unplug them and plug in your Blackouts.
This is a neckbridge set of our original high-output active Blackouts humbuckers. The perfect choice for metal players looking for warm complex chording and singing leads, the original Blackouts neck practically cries out for two-handed shred and thick rhythm playing. Its extended frequency response and organic feel make this a great humbucker for those who demand both responsiveness and the true tonal character of their guitar to shine through.The original Blackouts bridge humbucker delivers all of the power and full bodied punch that todays metal players demand from an active pickup. You get the high output signal level of an active pickup, with more of an organic feel and open tonal response that allows the character of your guitar to come through. The treble and bass response is extended beyond the range of traditional active pickups, and has been carefully balanced with a slightly scooped midrange for the perfect crunch. This pickup excels at screaming pinched harmonics and hyper-speed riffage with responsive dynamics across the entire fretboard.Comes with pots, hardware, quick-connector cables, capacitor (active pickups require a special cap value), output jack, battery clip, and wire needed for installation. If your guitar already has active pickups with quick-connector cables installed, you should be able to simply unplug them and plug in your Blackouts.
The saga of Jason Becker and Seymour Duncan spans decades when in the late80s Jason approached us with a new humbucker design. It was to have a slightly hotter-than-vintage wind of 12K coupled with an Alnico 5 magnet to capture the perfect balance of output, warmth, and note to note clarity that all shredders dreams of. Years later, the opportunity came for us to make Jasons vision a reality. The Perpetual Burn is made for endless tapping, wide bends, complex chords and intricate single note passages. This Trembucker version is spaced for whammy bridges so down- to- the-springs dive-bombs and screaming pull ups are no problem. And while Jasons signature pickup is the consummate shred machine, its medium output and voicing makes it perfect for other demanding styles from progressive rock to fusion.Hand made in Santa Barbara, CA, the Perpetual Burn comes with 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal free operation.