Build A 5150
Build A 5150
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks Our current 5150 neck is considered by many replica builders to be the most accurate rendition available for order of the famous hand cut Kramer 5150 style banana neck  and here at Butala Custom Guitars we don't believe in a one size fits all when it comes to guitar necks so it's fully customizable to get you your favorite specs while still looking like the original. Our 5150 comes with the correct spec headstock , tuner layout and “skunk stripe” on its rear as well as an available dual action truss rod with vintage slotted adjuster located at the heel that is installed in the correct location to look just like the original. The Beak to 5150 conversion option is true to the original that started life as a Beak or Strathead neck. The tuner holes are filled and additional material is added to the headstock in order to be reshaped into the 5150 style headstock. The main difference between our version and the original is that we use the same material ie. maple  that the neck is made from for the additional headstock material. Due to limited availability of larger size quartersawn maple at this time all banana style headstocks will no longer be one piece but will have the headstock made by laminating additional quartersawn maple to the side or sides of the headstock. Material used for additional material will be from the same piece of wood to try and match color and grain pattern to be as close as possible. This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck)
Starting at $200.00 Select options
Build A HG80
Build A HG80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks Based on the original Kramer "Holy Grail" and ESP versions of the banana neck. This order form is for a 22 or 24  fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action  truss rod with 4mm Hex adjuster, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards. Necks order with optional skunk stripe will receive matching plug except on necks with a headstock adjuster where the plug is deleted. Due to limited availability of larger size quartersawn maple at this time all banana style headstocks will no longer be one peice but will have the headstock made by laminating additional quartersawn maple to the side or sides of the headstock. Material used for additional material will be from the same piece of wood to try and match color and grain pattern to be as close as possible. Necks order with optional skunk stripe will receive matching plug except on necks with a headstock adjuster where the plug is deleted.
  • We are currently out of stock on standard grade ebony and as soon as it becomes available it will be added to the options list.  We  have some Richlite Black as an option for replacement to the ebony in the meantime,  my apologies for any inconvenience
 
Starting at $195.00 Select options
Build A HR1
Build A HR1
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 or 24 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action  truss rod with 4mm Hex key adjuster , black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards.
  • We are currently out of stock on standard grade ebony and as soon as it becomes available it will be added to the options list.  We  have some Richlite Black as an option for replacement to the ebony in the meantime,  my apologies for any inconvenience
Starting at $235.00 Select options
Build A SD80
Build A SD80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 21, 22 or 24  fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm Hex adjuster, black plastic side dot's on light colored fret boards and white plastic side dot's on dark colored fret boards. Necks order with optional skunk stripe will receive matching plug except on necks with a headstock adjuster where the plug is deleted. Based on the highly sought after San Dimas necks of the early 80's.
  • We are currently out of stock on standard grade ebony and as soon as it becomes available it will be added to the options list.  We  have some Richlite Black as an option for replacement to the ebony in the meantime,  my apologies for any inconvenience
Starting at $195.00 Select options
Build A SD1
Build A SD1
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's San Dimas  body shape. Default settings for body style, edge bevel and forearm contour are set to replicate the San Dimas  era  body  but you can change them if you like to the other options available in the drop down menu's.  
Starting at $145.00 Select options
Build A GLK-1
Build A GLK-1
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's Kamikaze body shape.  The Kamikaze use the modern straight  arm contour while the Sunburst Tiger uses the classic curved arm contour and both use the tighter 1/8" edge bevel.
Starting at $145.00 Select options
Build A Pacer Special
Build A Pacer Special
Build your custom handmade body from a variety of unique choices in our build menu. If you have any questions about this item or are looking for something special that you don’t see offered in our store contact us at Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80’s Kramer Pacer body shape. Comes standard with trussrod access at the heel and traditional Floyd rose rout vs our custom big block rout that is standard on our other bodies, if you would like omit the heel access rout it is modifiable in the drop down menu. Default settings for bodies edge bevel and forearm contour are set to replicate the original Pacer body but you can change them if you like to the other options available in the drop down menu's.
Starting at $145.00 Select options
Build A SS80
Build A SS80
Build your custom handmade body from a variety of unique choices in our build menu. If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's San Dimas 7/8 Dinky body shape.  
Starting at $145.00 Select options
Build A 62
Build A 62
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don’t see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 1962 "S" style body shape.
Starting at $145.00 Select options
Build A SPR
Build A SPR
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 or 24 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm Hex adjuster, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards.
  • We are currently out of stock on standard grade ebony and as soon as it becomes available it will be added to the options list.  We  have some Richlite Black as an option for replacement to the ebony in the meantime,  my apologies for any inconvenience
Starting at $195.00 Select options
Build a Tel-E
Build a Tel-E
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks
Starting at $145.00 Select options
Build a Frank-E
Build a Frank-E
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the San Dimas Asuza body shape. Default settings for body  are set to replicate the original  body including the original 3 single ghost pickup rout, heel notch and extra material on lower end of heel but all the selections can be modified to make your own unique specs for this body shape.
Starting at $150.00 Select options
Build A KB80
Build A KB80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 21,  22 or 24  fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm Hex adjuster, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards. Necks order with optional skunk stripe will receive matching plug except on necks with a headstock adjuster where the plug is deleted.
  • We are currently out of stock on standard grade ebony and as soon as it becomes available it will be added to the options list.  We  have some Richlite Black as an option for replacement to the ebony in the meantime,  my apologies for any inconvenience
Starting at $195.00 Select options
Build a D Tiger
Build a D Tiger
Build your custom handmade body from a variety of unique choices in our build menu. If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's San Dimas body shape with a 3D carve of a tiger graphic. The 3D carve has some small tooling marks left from the carving process so additional sanding or detailing will need to be done before paint or finishing. Bodies with the optional back carve will have a matching wood carved electronics cover .
Starting at $225.00 Select options
Build A Franky
Build A Franky
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a neck constructed from a neck shaft which features an attached fingerboard (2-piece neck).
Starting at $195.00 Select options
Build a RC80
Build a RC80
Build your custom handmade body from a variety of unique choices in our build menu. If you have any questions about this item or are looking for something special that you don’t see offered in our store contact us at Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks
Starting at $195.00 Select options