Slash Set APH-2S Zebra
Slash Set APH-2S Zebra

Summary

The classic tone of Appetite for Destruction in a pickup.

Description

When Slash was given the honor of having a Gibson Les Paul Signature model built, we sent over the same Alnico 2 Pro humbuckers that he has used for decades. Turns out, the new guitars sounded noticeably different than the original. So we accepted the challenge to make him a new pickup that would make all of his new signature guitars sound just like the original AFD Les Paul. The result is the Slash Signature Model humbucker. We used a different mag wire and winding spec, that, when combined with the alnico 2 bar magnet, provided exactly what was needed to push a stock Les Paul toward that familiar sustain, crunch, and midrange that was so characteristic of the tone of Slash’s original Derrig Les Paul copy.The Slash humbucker set is hand built in Santa Barbara the same way we built his originals in the 80s, using a nickel silver bottom plate with long mounting legs, single conductor braided lead wire, maple spacer, paper tape, and wax potting.

$238.00 Add to cart
Vintage Staggared Strat Middle RWRP SSL-1
Vintage Staggared Strat Middle RWRP SSL-1

Summary

For the perfect noiseless 2 & 4 Stratocaster quack, we offer this reverse woundreverse polarity version of our classic SSL-1 Strat pickup.

Description

The Vintage Staggered RWRP for Stratocaster uses the same hand ground alnico 5 rod magnets and heavy Formvar magnet wire as our standard version, but is made reverse woundreverse polarity, RWRP. When combined with the neck or bridge pickups, it will produce that classic in-between Strat quack, but with none of the traditional single coil hum. On its own, this pickup will give you the same bright, crisp tone that you get from the standard wound model.Combine with an SSL-1 in the neck and bridge for a complete vintage set. Or combine with a higher output bridge model such as a SSL-5 for more bite. Built the same way since 1978, we use the proper color and thickness of Forbon flatwork with all of our vintage Fender style single coil pickups. Along with the period correct magnet stagger, this pickup comes complete with waxed and tinned cloth pushback hook-up wires and traditional keyed bottom plate. We hand file the flatwork, assemble, and lacquer the bobbin just as it was done during Fenders Golden Age.

$89.00 Add to cart
Vintage Staggared Strat Middle RWRP SSL-1 White
Vintage Staggared Strat Middle RWRP SSL-1 White

Summary

For the perfect noiseless 2 & 4 Stratocaster quack, we offer this reverse woundreverse polarity version of our classic SSL-1 Strat pickup.

Description

The Vintage Staggered RWRP for Stratocaster uses the same hand ground alnico 5 rod magnets and heavy Formvar magnet wire as our standard version, but is made reverse woundreverse polarity, RWRP. When combined with the neck or bridge pickups, it will produce that classic in-between Strat quack, but with none of the traditional single coil hum. On its own, this pickup will give you the same bright, crisp tone that you get from the standard wound model.Combine with an SSL-1 in the neck and bridge for a complete vintage set. Or combine with a higher output bridge model such as a SSL-5 for more bite. Built the same way since 1978, we use the proper color and thickness of Forbon flatwork with all of our vintage Fender style single coil pickups. Along with the period correct magnet stagger, this pickup comes complete with waxed and tinned cloth pushback hook-up wires and traditional keyed bottom plate. We hand file the flatwork, assemble, and lacquer the bobbin just as it was done during Fenders Golden Age.

$89.00 Add to cart
Vintage Staggared Strat SSL-1
Vintage Staggared Strat SSL-1

Summary

We build this pickup exactly as they did in the old days for all the chime and bell tone enjoyed by Stratocaster players in the 50s.

Description

Our Vintage Staggered for Stratocaster uses hand ground alnico 5 rod magnets and heavy Formvar magnet wire with a special wind pattern to produce that bright, glassy, bell tone with all of the bounce and sparkle youd expect from the best 50s Strat pickups. The treble attack is crisp and immediate, while the low end remains articulate and focused. Chords ring out with clear note to note separation. Use a full set for a truly vintage vibe, or use in the neck & middle with a Custom Staggered in the bridge for a more rocking setup.Since 1978, weve been building all of our vintage Fender style single coil pickups just as it was done in Fenders Golden age. We start with the right color and thickness of Forbon flatwork, with the traditional keyed bottom plate. Then we hand file the flatwork, assemble with hand ground magnets, and lacquer the bobbin. After winding, each pickup is wax potted to reduce unwanted squeal, and comes with waxed and tinned cloth pushback hook-up wires and traditional keyed bottom plate.

$79.00 Add to cart
Vintage Staggared Strat SSL-1 White
Vintage Staggared Strat SSL-1 White

Summary

We build this pickup exactly as they did in the old days for all the chime and bell tone enjoyed by Stratocaster players in the 50s.

Description

Our Vintage Staggered for Stratocaster uses hand ground alnico 5 rod magnets and heavy Formvar magnet wire with a special wind pattern to produce that bright, glassy, bell tone with all of the bounce and sparkle youd expect from the best 50s Strat pickups. The treble attack is crisp and immediate, while the low end remains articulate and focused. Chords ring out with clear note to note separation. Use a full set for a truly vintage vibe, or use in the neck & middle with a Custom Staggered in the bridge for a more rocking setup.Since 1978, weve been building all of our vintage Fender style single coil pickups just as it was done in Fenders Golden age. We start with the right color and thickness of Forbon flatwork, with the traditional keyed bottom plate. Then we hand file the flatwork, assemble with hand ground magnets, and lacquer the bobbin. After winding, each pickup is wax potted to reduce unwanted squeal, and comes with waxed and tinned cloth pushback hook-up wires and traditional keyed bottom plate.

$79.00 Add to cart
Wheel Adjuster Trussrod
Wheel Adjuster Trussrod
Upgrade your neck with the addition of a Wheel Adjuster Trussrod.  This style of trussrod requires a notch in the heel of the neck pocket to accommodate the adjuster  and works with a standard neck pocket design.
$40.00 Add to cart
Wood Mounting Screws
Wood Mounting Screws
Genuine bridge mounting wood screws for Floyd Rose Tremolo System. Made in Germany (set of 2)
$26.00$30.00 Select options
YJM Fury Strat Set STK-10S Black
YJM Fury Strat Set STK-10S Black

Summary

Voiced by Yngwie himself, this set of noiseless Strat single coils will give you the articulate and fluid response you need to bring The Fury.

Description

While based on our original patented Stack design, the YJM Fury uses custom length alnico 5 rod magnets, and a unique coil architecture to bring you that perfect balance of sweet fluidity and articulation that is Yngwie J Malmsteen. The bridge model is designed to handle Yngwies chordal onslaught, and it delivers a precise, articulate response that has just the right amount of high end without sounding harsh or brittle. The bridge model is wound hotter to provide better balance with the neck & middle pickups.The neckmiddle model is designed to bring out the balance of Yngwies fluid left-hand technique with his broad mix of right-hand pick attack for a tone that is sweet and smooth. There just the right amount of high end to make this pickup extremely articulate, and especially responsive to dynamics.And its dead quiet Back in the 80s we patented a special bottom coil that actually injects negative hum into the pickup circuit, and at the end of the production process we fine tune each pickup for maximum noise cancelation. Hand made in Santa Barbara, CA the YJM Fury uses custom alnico 5 rod magnets, 4- conductor lead wire, and is wax potted for squeal free performance.

$327.00 Add to cart
YJM Fury Strat Set STK-10S White
YJM Fury Strat Set STK-10S White

Summary

Voiced by Yngwie himself, this set of noiseless Strat single coils will give you the articulate and fluid response you need to bring The Fury.

Description

While based on our original patented Stack design, the YJM Fury uses custom length alnico 5 rod magnets, and a unique coil architecture to bring you that perfect balance of sweet fluidity and articulation that is Yngwie J Malmsteen. The bridge model is designed to handle Yngwies chordal onslaught, and it delivers a precise, articulate response that has just the right amount of high end without sounding harsh or brittle. The bridge model is wound hotter to provide better balance with the neck & middle pickups.The neckmiddle model is designed to bring out the balance of Yngwies fluid left-hand technique with his broad mix of right-hand pick attack for a tone that is sweet and smooth. There just the right amount of high end to make this pickup extremely articulate, and especially responsive to dynamics.And its dead quiet Back in the 80s we patented a special bottom coil that actually injects negative hum into the pickup circuit, and at the end of the production process we fine tune each pickup for maximum noise cancelation. Hand made in Santa Barbara, CA the YJM Fury uses custom alnico 5 rod magnets, 4- conductor lead wire, and is wax potted for squeal free performance.

$327.00 Add to cart
Build A SD1
Build A SD1
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's San Dimas  body shape. Default settings for body style, edge bevel and forearm contour are set to replicate the San Dimas  era  body  but you can change them if you like to the other options available in the drop down menu's.  
Starting at $155.00 Select options
Build A GLK
Build A GLK
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's Kamikaze body shape.  The Kamikaze use the modern straight  arm contour while the Sunburst Tiger uses the classic curved arm contour and both use the tighter 1/8" edge bevel.
Starting at $155.00 Select options
Build A Pacer Special
Build A Pacer Special
Build your custom handmade body from a variety of unique choices in our build menu. If you have any questions about this item or are looking for something special that you don’t see offered in our store contact us at Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80’s Kramer Pacer body shape. Comes standard with trussrod access at the heel and traditional Floyd rose rout vs our custom big block rout that is standard on our other bodies, if you would like omit the heel access rout it is modifiable in the drop down menu. Default settings for bodies edge bevel and forearm contour are set to replicate the original Pacer body but you can change them if you like to the other options available in the drop down menu's.
Starting at $155.00 Select options
Build A SS80
Build A SS80
Build your custom handmade body from a variety of unique choices in our build menu. If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 80's San Dimas 7/8 Dinky body shape.  
Starting at $155.00 Select options
Build A 62
Build A 62
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don’t see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This guitar body is based on the 1962 "S" style body shape.
Starting at $155.00 Select options
Build A SPR
Build A SPR
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 or 24 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm Hex adjuster, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards.
  • We are currently out of stock on standard grade ebony and as soon as it becomes available it will be added to the options list.  We  have some Richlite Black as an option for replacement to the ebony in the meantime,  my apologies for any inconvenience
Starting at $195.00 Select options
Build a Tel-E
Build a Tel-E
Build your custom handmade body from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks
Starting at $155.00 Select options