Build A HG80
Build A HG80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks Based on the original Kramer "Holy Grail" and ESP versions of the banana neck. This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action  truss rod with 4mm allen key  adjuster located at the heel, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards. Due to limited availability of larger size quartersawn maple at this time all banana style headstocks will no longer be one peice but will have the headstock made by laminating additional quartersawn maple to the side the the headstock. Material used for additional material will be from the same piece of wood to try and match color and grain pattern to be as close as possible. If your looking for a 21 fret version of this neck we offer that  just send a note in the comments section for the request when ordering.  
$185.00$325.00 Select options
Build A 24Fret HG80
Build A 24Fret HG80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action  truss rod with 4mm allen key  adjuster located at the heel . Based on the original Kramer "Holy Grail" and ESP versions of the banana neck .
$215.00$355.00 Select options
Build A 5150
Build A 5150
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Accurate rendition of the famous hand cut Kramer 5150 style banana neck with a “skunk stripe” on its rear and a dual action truss rod with vintage slotted adjuster located at the heel. The Beak to 5150 conversion option is true to the original that started life as a Beak or Strathead neck. The tuner holes are filled and additional material is added to the headstock in order to be reshaped into the 5150 style headstock. The main differenece between our version and the original is that we use the same material ie. maple  that the neck is made from for the additional headstock material. Due to limited availability of larger size quartersawn maple at this time all banana style headstocks will no longer be one peice but will have the headstock made by laminating additional quartersawn maple to the side the the headstock. Material used for additional material will be from the same piece of wood to try and match color and grain pattern to be as close as possible.
$190.00$320.00 Select options
Build A SD80
Build A SD80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm adjuster at heel on 22 fret necks, black plastic side dot's on light colored fret boards and white plastic side dot's on dark colored fret boards. If your looking for a 21 fret version of this neck we offer that with a vintage slotted adjuster dual action truss rod  at the heel just send a note in the comments section for the request when ordering. Based on the highly sought after San Dimas necks of the early 80's.
$180.00$315.00 Select options
Build a HR1
Build a HR1
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action  truss rod with 4mm allen key  adjuster located at the heel, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards.  
$220.00$340.00 Select options
Build a SPR
Build a SPR
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm adjuster at heel, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards.  
$180.00$300.00 Select options
Build A Franky
Build A Franky
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks Standard features include a dual action truss rod with vintage sloted adjuster at heel . This order form is for a neck constructed from a neck shaft which features an attached fingerboard (2-piece neck).
$180.00$290.00 Select options
Build A  KB80
Build A KB80
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for a 22 fret neck constructed from a neck shaft which features an attached fingerboard (2-piece neck). Standard features include a dual action truss rod with 4mm adjuster at heel, black plastic side dot’s on light colored fret boards and white plastic side dot’s on dark colored fret boards.  
$180.00$300.00 Select options
Build A K4
Build A K4
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for  a multi laminate neck construction where the neck shaft and headstock are made from 3 pieces with wings laminated to the sides of the blank to create the headstock and an attached fingerboard (6-piece neck). Standard features include a dual action truss rod with 4mm adjuster at headstock . 4mm Mother of Pearl Dot inlays are installed in line at the upper low E side  of the fretboard vs centered on fretboard like traditional dot inlays. Multi laminate necks are quartersawn maple only at this time and offer superior stability in all climates.
$275.00$455.00 Select options
Build A GJP
Build A GJP
Build your custom handmade neck from a variety of unique choices in our build menu.  If you have any questions about this item or are looking for something special that you don't see offered in our store contact us at  Butala Custom Shop Guitars. Check out our support page for details regarding build time .Thanks This order form is for either a neck constructed with a scarf joint where the headstock is laminated on an angle to the  neck shaft with  an attached fingerboard (3-piece neck construction) or a multi laminate where the neck shaft and headstock are made from 3 pieces with wings laminated to the sides of the blank to create the headstock and an attached fingerboard (6-piece neck construction). Standard features include a dual action truss rod with 4mm adjuster at headstock .    
$210.00$420.00 Select options