Back to Parts
Rear Nut Mounting Screws
$4.00
Genuine replacement rear nut mounting screw for Floyd Rose Tremolo Systems. Made in Germany (set of 2)
10 in stock
Categories: Parts, Tremolo Parts
Related products
Original Fat Brass Block
This "Fat" brass big block will add mass and sustain to your Floyd Rose bridge along with the tonal qualities of brass. Works with Floyd Rose Original, Non-Fine Tuner tremolo systems. Width is 50.15 mm and thickness is 12.90 mm.
Brass has been a much desired material for guitar luthiers dating back to the invention of the instrument; it is notorious for increasing warmth and clarity simultaneously, a rare combination. While greatly strengthening chord clarity and beefing up individual tones, it also greatly improves resonance, especially in the midrange of the instrument. All of these improvements are accompanied with the undeniably vintage sound and feel of this time-tested material.
Since this block is larger than a conventional sustain block, it can also limit upward travel of the tremolo and can be set to rest against the body in a blocked bridge configuration. For floating bridge setup this block may require some routing in the spring cavity.
Fat Brass L Sustain Block
Official Floyd Rose L Shaped Fat Brass upgradable Sustain Blocks for Floyd Rose Tremolo units. Studies have shown that Mass = Sustain. The all new Fat Brass "L" shaped sustain blocks by Floyd Rose have been specifically designed to take advantage of the unused area under the tremolo arm. By incorporating an additional "L" shape of brass to the design of a stock sustain block, Floyd Rose has been able to utilize this previously unused space for additional mass which equates to more sustain and additional tonal qualities of brass.
Brass has been a much desired material for guitar luthiers dating back to the invention of the instrument; it is notorious for increasing warmth and clarity simultaneously, a rare combination. While greatly strengthening chord clarity and beefing up individual notes, it also greatly improves resonance, especially in the midrange of the instrument. All of these improvements are accompanied with the undeniably vintage sound and feel of this time-tested material.
Since this block is larger than a conventional sustain block, it can also limit upward travel of the tremolo and can be set to rest against the body in a blocked bridge configuration. For floating bridge setup this block may require some routing in the spring cavity.
Chrome Neck Mounting Ferrules
Set of 4 ferrules and 4 screws for bolting a neck onto a contoured solidbody when a flat neck attachment plate is impractical.
5/8"-diameter counterbored holes required.
The suggested 5/8" diameter is slightly oversize to allow for finish thickness in the recess. Use a 15mm bit if you plan to fit the ferrule with no finish in the recess.
Screws are 11/64" (4.2mm) dia. x 1-1/2" (38mm) long Phillips ovalhead.
Black Neck Mounting Ferrules
Set of 4 ferrules and 4 screws for bolting a neck onto a contoured solidbody when a flat neck attachment plate is impractical.
5/8″-diameter counterbored holes required.
The suggested 5/8″ diameter is slightly oversize to allow for finish thickness in the recess. Use a 15mm bit if you plan to fit the ferrule with no finish in the recess.
Screws are 11/64" (4.2mm) dia. x 1-1/2" (38mm) long Phillips ovalhead.